Settings
Shipping country
Languages
- Products description
Products description
Product details for MH 9050
Kit for modular frame (ready for assembly - only wood glue needed)
Made from layered plywood 12mm with birch-topping
90 cm long
50 cm wide
15 cm high
Module head with holes according to NCI standard (red markings) as well as SPB standard (yellow markings). Also fits FREMO standard when 6cmm holes are widened to 8mm. Module head sits adjoint to one edge so the additional 10cm width are on the other end. Module head is not centric with additional 5cm on each side!
Including track board from 9mm birch plywood 10 cm wide (although picture shows full cover board)
Including 2 cross frames with three windows and 10 cm height
Corner joints and corss frames with tongue and groiive joints (although picture shows tenon joints and finger tenon joints)
Net weight only 4,4 kg.
Cross frames provide 4 holes of 4 mm for bus wires and an additional 4 holes of 4 mm to fix bus wire plugs for tidying up the cables below during transport or for an untangled insertion of frames into transport cases. Cross frames are placed 1 cm below the top frame height to allow for the track board to be mounted on top. Cross frames are only 10cm high and provide extra free room below the cross frames and above bottom line of the frame.
Holes according to NCI standard are mirrowed (bright red markings) to allow usage as a side changer (in both directions) at your own preference without the need for additional frame types.
Set includes: 2 side boards, 2 cross frames, 2 module heads, and 1 track board.
Leg holders, fully closed tops or legs are available as separate add-ons.
Wood glue and preferably clamps are sufficient. No further machinery needed. A screwdriver (PHZ 2) and a straight edge are recommended.
Details on responsible manufacturer
Modulhaus160, Johannes Mäding, Stromeyersdorfstr. 4, 78467 Konstanz, Germany
kontakt@modulhaus160.de
Details on product safety as per EU regulation
Modelling item - no toy. Boards made of layered wood sheets that come with “sharp” corners and may have chipping edges. Only roughly sanded (equivalent 80). There is a low risk of injuries by chips or rough surfaces and also if dropped on oneself or if parts hit people with impact. Will burn easily if exposed to fire and may fully dissolve into smoke. Will eventually fully rot like wood if exposed to force of nature yet contains glue of unknown environmental impact between the layers. When glueing the parts together, the instructions and safety precautions displayed on the glue bottle are to be followed. If not mounted according to the instructions, the modular frame may turn out to be dysfunctional.
Kit for modular frame (ready for assembly - only wood glue needed)
Made from layered plywood 12mm with birch-topping
90 cm long
50 cm wide
15 cm high
Module head with holes according to NCI standard (red markings) as well as SPB standard (yellow markings). Also fits FREMO standard when 6cmm holes are widened to 8mm. Module head sits adjoint to one edge so the additional 10cm width are on the other end. Module head is not centric with additional 5cm on each side!
Including track board from 9mm birch plywood 10 cm wide (although picture shows full cover board)
Including 2 cross frames with three windows and 10 cm height
Corner joints and corss frames with tongue and groiive joints (although picture shows tenon joints and finger tenon joints)
Net weight only 4,4 kg.
Cross frames provide 4 holes of 4 mm for bus wires and an additional 4 holes of 4 mm to fix bus wire plugs for tidying up the cables below during transport or for an untangled insertion of frames into transport cases. Cross frames are placed 1 cm below the top frame height to allow for the track board to be mounted on top. Cross frames are only 10cm high and provide extra free room below the cross frames and above bottom line of the frame.
Holes according to NCI standard are mirrowed (bright red markings) to allow usage as a side changer (in both directions) at your own preference without the need for additional frame types.
Set includes: 2 side boards, 2 cross frames, 2 module heads, and 1 track board.
Leg holders, fully closed tops or legs are available as separate add-ons.
Wood glue and preferably clamps are sufficient. No further machinery needed. A screwdriver (PHZ 2) and a straight edge are recommended.
Details on responsible manufacturer
Modulhaus160, Johannes Mäding, Stromeyersdorfstr. 4, 78467 Konstanz, Germany
kontakt@modulhaus160.de
Details on product safety as per EU regulation
Modelling item - no toy. Boards made of layered wood sheets that come with “sharp” corners and may have chipping edges. Only roughly sanded (equivalent 80). There is a low risk of injuries by chips or rough surfaces and also if dropped on oneself or if parts hit people with impact. Will burn easily if exposed to fire and may fully dissolve into smoke. Will eventually fully rot like wood if exposed to force of nature yet contains glue of unknown environmental impact between the layers. When glueing the parts together, the instructions and safety precautions displayed on the glue bottle are to be followed. If not mounted according to the instructions, the modular frame may turn out to be dysfunctional.
This Product was added to our catalogue on 21/12/2024.
Customers who bought this product also bought the following products:
Last viewed:
Payment methods
Social Media
All prices excl. VAT. plus shipping and handling. The crossed out prices correspond to the price at modulhaus160.
modulhaus160 © 2026 | Template © 2009-2026 by modified eCommerce Shopsoftware
modulhaus160 © 2026 | Template © 2009-2026 by modified eCommerce Shopsoftware