Module frame according Spassbahner standard, straight, 90cm and 50 cm width (Kit)

Product details on MH SPK090-50
Kit for modular frame (ready for assembly - only wood glue needed)
made from layered plywood 12mm with birch-topping
90 cm long
50 cm wide
10 cm high
Module head with holes according to FREMO standard (blue markings) as well as SPB standard (yellow markings). Module profile for single/double track and centered embankment (there 10,5 cm high) and 5/7 cm wide at the bottom of the embankment and 3,5/5,5 cm at the top, (so slightly higher and therefore narrower at the top than the NEM Norm with 3mm height)
Including track board from 9mm birch plywood 10 cm wide
Including 2 cross frames with three windows and 9 cm height
Joints with tongue and groove
Net weight only 4,85 kg.

Cross frames provide 4 holes of 4 mm for bus wires and an additional 4 holes of 4 mm to fix bus wire plugs for tidying up the cables below during transport or for an untangled insertion of frames into transport cases. Cross frames are placed 1 cm below the top frame height to allow for the track board to be mounted on top. 
Set includes: 2 side boards, 2 cross frames, 2 module heads, and 1 track board. Leg holders, fully closed tops or legs are available as separate add-ons.
Wood glue and preferably clamps are sufficient. No further machinery needed.

Details on responsible manufacturer
Modulhaus160, Johannes Mäding, Stromeyersdorfstr. 4, 78467 Konstanz, Germany
kontakt@modulhaus160.de

Details on product safety as per EU regulation
Modelling item - no toy. Boards made of layered wood sheets that come with “sharp” corners and may have chipping edges. Only roughly sanded (equivalent 80). There is a low risk of injuries by chips or rough surfaces and also if dropped on oneself or if parts hit people with impact. Will burn easily if exposed to fire and may fully dissolve into smoke. Will eventually fully rot like wood if exposed to force of nature yet contains glue of unknown environmental impact between the layers. When glueing the parts together, the instructions and safety precautions displayed on the glue bottle are to be followed. If not mounted according to the instructions, the modular frame may turn out to be dysfunctional.