Module Frame according NCI standard, 30° curve, 90cm (Kit)

Product details for MH T90
Kit for modular frame (ready for assembly - only wood glue needed)
cut by CNC
Made from layered plywood 12mm with birch-topping
90 cm long (longest edge)
40 cm wide (at module head), frame width approx. 39 cm
15 cm high
Module head with holes according to NCI standard (red markings) as well as SPB standard (yellow markings). Also fits FREMO standard when 6cmm holes are widened to 8mm.
Including track board from 9mm birch plywood 10 cm wide
Including 2 cross frames with (each) three windows and 10 cm height
Corner joints with flat dowels; tenon joints for cross frames
Net weight only 3,7 kg.

Module frame is trapezoidal. The angle of 30 degrees is created by the two mirrored 15° angles at both ends. Three frames of 30° make up a 90° curve. Two frames in opposite combination make up for a sidewise offset. This frame may be combined with any other of all offered module frames, especially the longer 30° frames and the straight frames in any combination. The noted length of trapezoidal frames refers to the longer straight board and aligns with the standards on frame lengths.
Trapezoidal frames are slightly narrower with an approximate width of 39 cm as the noted width of 40cm refers to the module heads that are in an angle here. This assures aligned outside edges of all frames and the free combination of all frame types.

Curve radius is 158 und 155 cm (outer curve) or 145 und 142 cm (inner curve) based on a track distance and position according to the NCI standard. (Works accordingly with any other standard but exact figures are different).

Cross frames provide 4 holes of 4 mm for bus wires and an additional 4 holes of 4 mm to fix bus wire plugs for tidying up the cables below during transport or for an untangled insertion of frames into transport cases. Cross frames are placed 1 cm below the top frame height to allow for the track board to be mounted on top. Cross frames are only 10cm high and provide extra free room below the cross frames and above bottom line of the frame.

Holes according to NCI standard are mirrowed (bright red markings) to allow usage as a side changer (in both directions) at your own preference without the need for additional frame types.

Set includes: 2 side boards, 2 cross frame, 2 module heads, 8 flat dowels and 1 track board.
Leg holders, fully closed tops or legs are available as separate add-ons.

Wood glue and preferably clamps are sufficient. No further machinery needed. A screwdriver (PHZ 2) and a straight edge are recommended.


Details on responsible manufacturer
Modulhaus160, Johannes Mäding, Stromeyersdorfstr. 4, 78467 Konstanz, Germany
kontakt@modulhaus160.de

Details on product safety as per EU regulation
Modelling item - no toy. Boards made of layered wood sheets that come with “sharp” corners and may have chipping edges. Only roughly sanded (equivalent 80). There is a low risk of injuries by chips or rough surfaces and also if dropped on oneself or if parts hit people with impact. Will burn easily if exposed to fire and may fully dissolve into smoke. Will eventually fully rot like wood if exposed to force of nature yet contains glue of unknown environmental impact between the layers. When glueing the parts together, the instructions and safety precautions displayed on the glue bottle are to be followed. If not mounted according to the instructions, the modular frame may turn out to be dysfunctional.